Products

Plastic, Recycle, Composite

Plastics Additives

Type Product Features Application
Antistatic Agent L710
  • It is very effective for PC and PMMA by adding less than 1w%
  • PC, PMMA, Thermoplastics
GMS AP-95
  • Very Effective for Antistatic
  • PMMA
Anti Hydrolysist Agent Resalloy EP114
  • Increase Intrinsic Viscosity, Molecular Weight , Melt index and Melt Strength
  • PET, PBT, PC, PLA
Addico 9302
  • Random Copolymer of Styrene and GMA(glycidyl methacrylate)
  • GMA content : 18 ~ 22%
  • PLA, PBT, PET, TPO, TPE, PMMA
  • PLA+PP, PLA alloys
  • PET Fiber, TPE Fiber
  • PET Film, PMMA Film
Addico 9320
  • Medium molecular Weight Copolymer with Medium Content of GMA
  • GMA content : 10 ~ 14%
  • PET, PBT, PLA, ABS, SMA, PO/PU and PO/Acrylics.
LUBIO¢ç AS 3
  • Appearance: white powder
  • NCN content : 13%
  • Odorless , Low volatility, No migration tendency
  • Dosage Recommendations : 0.3 ~ 1.5 wt%
  • Compatible withPET, PBT, PU, PA, PVC, biopolymers, vegetable oils, synthetic esters
  • Effective by the processing of thermal encumbered systems
  • Provides for a long-time stabilization of plastic parts, films, fibers, adhesives and ester based fluids
  • Become immune to moisture and acid catalyzed disintegration.
LUBIO¢ç AS 11
  • Appearance: white powder
  • Melting Point: About 150¡ÆC
  • NCN content : 18%
  • Bulk density(20¡ÆC): 550kg/m3
  • Acid value: 240mgKOH/g
  • Dosage Recommendations : 0.2 ~ 0.5 wt%
  • PET, PBT, PU, EVA, POM, PA
Deodorant 38243 ADDNox Re-Fresh Plus Masterbatch
  • Unique masterbatch providing highly efficient absorption & blocking unpleasant odors.
  • Features good compatibility with plastics & high efficiency.
  • Unlike fragrances, It doesn¡¯t mask bad odor, it eliminates odor chemically.
  • Recommended for applications where significant amount of Regrind material is added in product.
  • Can be used for all Polyolefinic applications.
  • Recommended Dosage is 0.5-1.5 % or as per customer requirement/ required performance.
JH-200A
  • Appearance: white powder
  • best weather resistance
  • Small dosage with long-time effect
  • When it used in plastic, it has functions of lubricant and block resistance
  • no toxicity, no irritation
  • It quickly removes odor by trapping, enveloping and neutralizing aldehydes and ammonia irritant gases
  • Used in rubber plastic products
  • It is especially applied to plastic products which are made of regrind materials to raise the value of product
  • It is widely used in rubber products and some plastic products, such as plastic particles, color master batch, etc
PTFE Anti-dripping Agent FD3100
  • PTFE content : 50%
  • moisture content : <1%
  • Styrene content : 40%
  • Acrylonitrile content : 10%
  • PBT (0.2-1%), upgrade the flame retardant ratingand CTI
  • ABS (0.1-0.2%), reduce the amount of bromide (Br) and antimony (Sb) in flame retardant system, improve impact strength
  • PC (0.1-0.8%), prevent dripping, upgrade the flame retardant rating
  • PC/ABS (0.2-0.3%), compound with BDP/RDP, prevent dripping, upgrade the flame retardant rating
  • HIPS (0.2-0.3%), prevent dripping, upgrade the flame retardant rating
  • PA (0.2-0.3%), prevent dripping, upgrade the flame retardant rating
  • PE/PP (0.2-0.5%), prevent dripping, upgrade the flame retardant rating.
FD3200
  • PTFE content : 100%
  • Proportion: 2.2g/cm3
  • Particle size: 300um
  • PC, ABS, PC/ABS, PBT, HIPS
  • Use with Br, P and Si
PTFE Micronized Powders FW4200
  • Bulk density: 450g/l
  • Particle size : 3um
  • Melting Point : 325¡É
  • Specific surface: 3m2/g
  • Mainly used for printing ink to improve wear resistance, surface smooth, glossiness as well as reduce blocking.
  • good in dispersion, no agglomerating and easy to disperse in the solid and liquidmatrix.
  • Normally add ratio is 5-20%.
FW4300
  • Bulk density : 425g/l
  • Particle size : 12um
  • Melting Point : 325¡É
  • Specific surface : 1.5m2/g
  • Designed for use as an additive in elastomers and plastics where improved lubricity and wear resistance, and small particle size is required.
  • improves release, slip, surface smoothness, chemical resistance, UV stability and moisture repelling.
  • Normally add ratio is 5-20%.
Additive for PVC
Type Product Product Character Recommended Dosage Applications
PVC Impact Modifier MBS Resin LB-106
  • For opaque PVC products, High transparency no crease whitening
  • 6~8
  • High grade sheets, Films
LB-126
  • For opaque PVC products, High transparency no crease whitening
  • 5~7
  • Sheets, Films
LB-136
  • For opaque PVC products, High transparency no crease whitening
  • 5~7
  • Sheets, Films
LB-22
  • For opaque PVC products, High impact
  • 7~10
  • Sheets, Films
LB-156
  • For opaque PVC products, Ultra-high impact
  • 4~8
  • Sheets, Films Pipes, Pipe fittings
LB-166
  • For opaque PVC products, Ultra-high impact
  • 4~8
  • Sheets, Films Pipes, Pipe fittings
Type Product Product Character Impact proof effect under normal temperature Impact proof effect under low temperature
Acrylic Impact Modifiers LS-12
  • Excellent transparence
*** ***
LS-21
  • Fast fusion
**** ****
LS-22
  • Fast fusions, good gloss
**** ****
LS-50
  • Excellent low-temperature impact properties
****** ******
LS-51
  • Excellent processability
**** ****
LS-55
  • Excellent processability
**** *****
LS-61
  • Excellent processability, Fast fusion
***** *****
Type Product Granularity (40 mesh passing percentage> (%) Appearance viscosity(¥ç)(Ubbelohde Viscometer) Volatilization Content(%)
PVC Processing Aid LP-551 ¡Ã98 %
  • White free flowing powder
  • 2.0-3.0
  • ¡Â1.0%
LP-20
  • White free flowing powder
  • 2.5-3.2
  • ¡Â1.0%
LP-21 ¡Ã98 %
  • White free flowing powder
  • 4.5-5.0
  • ¡Â1.0%
B-23
  • White free flowing powder
  • 4.8-5.3
  • ¡Â1.0%
LS-530 ¡Ã98 %
  • White free flowing powder
  • 5.0-6.5
  • ¡Â1.0%
LP-40
  • White free flowing powder
  • 7.0-9.0
  • ¡Â1.0%
LP-50 ¡Ã98 %
  • White free flowing powder
  • 8.5-10.5
  • ¡Â1.0%
LP-80
  • White free flowing powder
  • 8.0-12.0
  • ¡Â1.0%
LP-81
  • White free flowing powder
  • 8.0-11
  • ¡Â1.0%
LP-90
  • White free flowing powder
  • 11.0-13.0
  • ¡Â1.0%
Type Product Granularity (40 mesh passing percentage> (%) Appearance viscosity(¥ç)(Ubbelohde Viscometer) Volatilization Content(%) Density(g/cm3) Recommended Dosage
PVC Lubricating Processing Aids LP-175 ¡Ã98 %
  • White free flowing powder
  • 0.4-1.0
  • ¡Â1.0%
  • 0.35~0.55
  • 0.3~1.0
LP-102
  • White free flowing powder
  • 0.8-1.3
  • ¡Â1.0%
  • 0.35~0.55
  • 0.5~1.5
LP-103
  • White free flowing powder
  • 0.8-1.3
  • ¡Â1.0%
  • 0.35~0.55
  • 0.5~2.0