Products

Urethane, Textile ,Leather

PU Foaming Additive

PU foaming agent is a product that controls the cells of various urethane foam to implement the desired type of cell.
It facilitates mixture of raw materials in urethane systems and reduces surface tension to aid bubble growth. It also reduces the pressure difference between air bubbles to prevent the spread of gas, while also preventing uneven cell growth, and ensures that urethane cells are stabilized and fluidity and density are uniform.
Hard foam improves insulation by increasing the cell's stand-alone bubble rate, while soft foam adjusts the interlocking.

Product Foam Type Viscosity
(25℃,mPa.s)/
OH equivalent
(calculated,
mg KOH/g)		 Description
SZ-1959 Microcellular 11600/0
  • Water Insoluble, S.G. 0.94/ mechanical froth foam
2585 Additive Mold 75/58
  • Water Insoluble, S.G. 0.98/ Cold-cure For flexible MDI mold foam and energy-absorbing NVH system
3274 Additive Mold 140/40
  • Water Insoluble, S.G. 0.98/ TDI/For MDI HR molded foam system
SZ-1718 Rigid 870/50
  • Water Soluble, S.G. 1.05/ For home appliance rigid foam blown by hydrocarbon or water
2938 Additive Rigid 370/0
  • Water Soluble, S.G. 1.04/ For PUR/PIR insulation panel foam blown by HC, H2O blown
5575 Additive Rigid 550/52
  • Water Soluble, S.G. 1.05/ For PUR/PIR general rigid foam
5604 Additive Rigid 320/59
  • Water Soluble, S.G. 1.04/ For rigid foam
OFX-0193 Rigid, Microcellular 305/75/1.08
  • Water Soluble, S.G. 1.08/ For rigid foam, especially for shoe-sole and integral skin
5000 Additive Rigid, Mold  
  • For Open cell rigid foam. Internal mold release for flexible mold foam
1280 Additive Slab 530/100
  • Water Soluble, S.G. 1.03/ For flexible slabstock foam
2904 Additive Slab  
  • Viscoelastic. For flexible slabstock foam, medium potency
5952 Additive Slab 590/419
  • Water Soluble, S.G. 1.03/ high potency slabstock foam blown by liquid CO2 or acetone. Improve FR property in FR foam.
5990 Additive Slab  
  • High potency used for flexible slabstock foam. Used with nonhalogen flame retardant
5125 Additive Slab 950/0
  • Water Soluble, S.G. 1.05/ For TDI system and FR polyether slabstock foam
SZ-1952 Slab, Microcellular 13200/34
  • Water Insoluble, S.G. 1.00/ For slow-recovery slabstock foam and mechanical froth foam. Viscoelastic.
5043 Additive Slab, Mold, Microcellular 280/28
  • Water Insoluble, S.G. 1.00/ For TDI HR molded and slabstock foam, microcellular foam
3607 Additive Slab, Mold, Microcellular 1020/58
  • Water Insoluble, S.G. 1.05/ For Ester slabstock and TDI/MDI HR mold foam, Elastomer foam and shoe sole
5160 Additive Slab, Mold, Rigid 1080/0
  • Water Soluble, S.G. 1.05/ Medium potency for TDI polyether slabstock, high density MDI foam and high density rigid mold foam

Silicone Antifoam

Silicone antifoam eliminate bubbles in the manufacturing process without affecting the properties. The antifoaming performance and persistence are better than organic antifoams, so even in small quantities, it is more efficient and economical. It also has excellent effect in destroying or deaerating air bubbles in a wide variety of areas, such as hot and cold, water and solvent, base and acidic solutions. In addition to the antifoams, a variety of silicone polymers are produced and sold for water.

Type Product Solid % Characteristics and Applications
Waterbase 65 additive 59%
  • Waterbase and solventbase, Antifoaming, leveling, slip and anti-abrasion for Paint and In
AFE-0100 10%
  • Waterbase, General purpose antifoam. Excellent cost effective for liquid process
AFE-0110 15%
  • Waterbase, General purpose antifoam. Excellent cost effective for liquid process
AFE-0120 25%
  • Waterbase, General purpose antifoam. Excellent cost effective for liquid process
AFE-0300 30%
  • Waterbase, FDA Grade, For agrochemical, detergent and pharmaceuticals
AFE-0700 10%
  • Waterbase, Alkali resistance. Exellent dilution stability. For nylon and textile process
AFE-0800 30%
  • Waterbase, Resistance for high temperature, PH, shear. For textile and high pressure/temp. process
AFE-1226 20%
  • Waterbase, Resistance for high temperature and PH, Excellent dilution stability. For various process
AFE-1247 30%
  • Waterbase, Small particle (Transparent), Excellent long lasting and stability. For MWF and various process
AFE-1520 20%
  • Waterbase, FDA grade. Good acid stability. For emulsion polymerization and various
AFE-3150 50%
  • Waterbase, Excellent antifoaming. Resistance for high temp. and PH. Various process
Compound ACP-0001 100%
  • Solventbase, Excellent antifoaming/ For paint, ink and petrochemical process
ACP-1400 100%
  • Solventbase, Excellent antifoaming/ For paint, ink and petrochemical process
ACP-1500 100%
  • Solventbase, FDA grade/ Agrochemical
Self Emulsification ACP-1266 100%
  • Self emulsificable. Excellent long lasting and antifoaming. For MWF, Textile and various.
ACP-0100 100%
  • Self emulsificable, 100% solid, For wide range PH, solvent and water. Agrochemical, expoxy, detergent etc.
ACP-0544 100%
  • Self emulsificable, Good resistance for shear, PH and high temp. deaerator. For slurry, detergent, dye
Powder APW-4248 100%
  • Waterbase, Flake / For powder detergent and process
ACP-1920 100%
  • Waterbase용, powder/ For powder detergent and process
Fluid FS-1265 100%
  • Solventbase, 300,1000,10000cst/ Fluoro silicone. Antifoaming, wetting and leveling for paint and ink.
7 Additive 4.5%~6.0%
  • Solventbase, Fluoro silicone. Antifoaming, wetting and leveling for paint and ink.
102F Addtive 0.95~1.05%
  • Solventbase, MEK and n-propyl acetate as a dilutent. Excellent compatability for paint and ink
71 Additive 100%
  • Waterbase and solventbase, Excellent compatibility for organic. Antifoam and deaerator for paint and ink
74 Additive 100%
  • Waterbase and solventbase, Excellent compatibility for organic. Antifoam and deaerator for paint and ink