WOORI FINECHEM CORP.

About Us

Products

Plastic, Recycle, Composite Paint, Ink, Coating Urethane, Textile ,Leather GORE Filter Bags/Packaging Vents Dow (Dow Corning) Silicone Non-toxic Antibacterial agent(CuS) The SPC® Solution

CS Center

News

Urethane, Textile ,Leather

PU Foaming Additive

PU foaming agent is a product that controls the cells of various urethane foam to implement the desired type of cell.
It facilitates mixture of raw materials in urethane systems and reduces surface tension to aid bubble growth. It also reduces the pressure difference between air bubbles to prevent the spread of gas, while also preventing uneven cell growth, and ensures that urethane cells are stabilized and fluidity and density are uniform.
Hard foam improves insulation by increasing the cell's stand-alone bubble rate, while soft foam adjusts the interlocking.

Product	Foam Type	Viscosity (25℃,mPa.s)/ OH equivalent (calculated, mg KOH/g)	Description
SZ-1959	Microcellular	11600/0	Water Insoluble, S.G. 0.94/ mechanical froth foam
2585 Additive	Mold	75/58	Water Insoluble, S.G. 0.98/ Cold-cure For flexible MDI mold foam and energy-absorbing NVH system
3274 Additive	Mold	140/40	Water Insoluble, S.G. 0.98/ TDI/For MDI HR molded foam system
SZ-1718	Rigid	870/50	Water Soluble, S.G. 1.05/ For home appliance rigid foam blown by hydrocarbon or water
2938 Additive	Rigid	370/0	Water Soluble, S.G. 1.04/ For PUR/PIR insulation panel foam blown by HC, H2O blown
5575 Additive	Rigid	550/52	Water Soluble, S.G. 1.05/ For PUR/PIR general rigid foam
5604 Additive	Rigid	320/59	Water Soluble, S.G. 1.04/ For rigid foam
OFX-0193	Rigid, Microcellular	305/75/1.08	Water Soluble, S.G. 1.08/ For rigid foam, especially for shoe-sole and integral skin
5000 Additive	Rigid, Mold		For Open cell rigid foam. Internal mold release for flexible mold foam
1280 Additive	Slab	530/100	Water Soluble, S.G. 1.03/ For flexible slabstock foam
2904 Additive	Slab		Viscoelastic. For flexible slabstock foam, medium potency
5952 Additive	Slab	590/419	Water Soluble, S.G. 1.03/ high potency slabstock foam blown by liquid CO2 or acetone. Improve FR property in FR foam.
5990 Additive	Slab		High potency used for flexible slabstock foam. Used with nonhalogen flame retardant
5125 Additive	Slab	950/0	Water Soluble, S.G. 1.05/ For TDI system and FR polyether slabstock foam
SZ-1952	Slab, Microcellular	13200/34	Water Insoluble, S.G. 1.00/ For slow-recovery slabstock foam and mechanical froth foam. Viscoelastic.
5043 Additive	Slab, Mold, Microcellular	280/28	Water Insoluble, S.G. 1.00/ For TDI HR molded and slabstock foam, microcellular foam
3607 Additive	Slab, Mold, Microcellular	1020/58	Water Insoluble, S.G. 1.05/ For Ester slabstock and TDI/MDI HR mold foam, Elastomer foam and shoe sole
5160 Additive	Slab, Mold, Rigid	1080/0	Water Soluble, S.G. 1.05/ Medium potency for TDI polyether slabstock, high density MDI foam and high density rigid mold foam

Silicone Antifoam

Silicone antifoam eliminate bubbles in the manufacturing process without affecting the properties. The antifoaming performance and persistence are better than organic antifoams, so even in small quantities, it is more efficient and economical. It also has excellent effect in destroying or deaerating air bubbles in a wide variety of areas, such as hot and cold, water and solvent, base and acidic solutions. In addition to the antifoams, a variety of silicone polymers are produced and sold for water.

Type	Product	Solid %	Characteristics and Applications
Waterbase	65 additive	59%	Waterbase and solventbase, Antifoaming, leveling, slip and anti-abrasion for Paint and In
	AFE-0100	10%	Waterbase, General purpose antifoam. Excellent cost effective for liquid process
	AFE-0110	15%	Waterbase, General purpose antifoam. Excellent cost effective for liquid process
	AFE-0120	25%	Waterbase, General purpose antifoam. Excellent cost effective for liquid process
	AFE-0300	30%	Waterbase, FDA Grade, For agrochemical, detergent and pharmaceuticals
	AFE-0700	10%	Waterbase, Alkali resistance. Exellent dilution stability. For nylon and textile process
	AFE-0800	30%	Waterbase, Resistance for high temperature, PH, shear. For textile and high pressure/temp. process
	AFE-1226	20%	Waterbase, Resistance for high temperature and PH, Excellent dilution stability. For various process
	AFE-1247	30%	Waterbase, Small particle (Transparent), Excellent long lasting and stability. For MWF and various process
	AFE-1520	20%	Waterbase, FDA grade. Good acid stability. For emulsion polymerization and various
	AFE-3150	50%	Waterbase, Excellent antifoaming. Resistance for high temp. and PH. Various process
Compound	ACP-0001	100%	Solventbase, Excellent antifoaming/ For paint, ink and petrochemical process
	ACP-1400	100%	Solventbase, Excellent antifoaming/ For paint, ink and petrochemical process
	ACP-1500	100%	Solventbase, FDA grade/ Agrochemical
Self Emulsification	ACP-1266	100%	Self emulsificable. Excellent long lasting and antifoaming. For MWF, Textile and various.
	ACP-0100	100%	Self emulsificable, 100% solid, For wide range PH, solvent and water. Agrochemical, expoxy, detergent etc.
	ACP-0544	100%	Self emulsificable, Good resistance for shear, PH and high temp. deaerator. For slurry, detergent, dye
Powder	APW-4248	100%	Waterbase, Flake / For powder detergent and process
Powder	ACP-1920	100%	Waterbase용, powder/ For powder detergent and process
Fluid	FS-1265	100%	Solventbase, 300,1000,10000cst/ Fluoro silicone. Antifoaming, wetting and leveling for paint and ink.
	7 Additive	4.5%~6.0%	Solventbase, Fluoro silicone. Antifoaming, wetting and leveling for paint and ink.
	102F Addtive	0.95~1.05%	Solventbase, MEK and n-propyl acetate as a dilutent. Excellent compatability for paint and ink
	71 Additive	100%	Waterbase and solventbase, Excellent compatibility for organic. Antifoam and deaerator for paint and ink
	74 Additive	100%	Waterbase and solventbase, Excellent compatibility for organic. Antifoam and deaerator for paint and ink